SONOS Era 300 Wall Mount Installation Guide
While the SONOS ecosystem is renowned for its high-end audio, the solutions available to mount their speakers are typically over complicated and expensive. This innovative wall mount enhances your audio setup with its low-profile design, affordability, and straightforward installation process. Unlike alternatives with moving parts that can complicate installation and increase the risk of breakage, our wall mount offers a hassle-free, stylish, and budget-friendly way to elevate your sound system. In this installation guide, we’ll walk you through the simplicity of setting up your SONOS Era 300 Wall Mount, allowing you to enjoy an immersive audio experience without breaking the bank.
Pick and prepare a location
The location will largely depend on your personal preference and how you intend to use the speaker. Regardless of where you mount it SONOS’ Trueplay tuning balances the sound for wherever it’s placed, and whatever you’re listening to. You can find more details regarding placement on SONOS User Guide for the Era 300 here.
The other thing to consider is the wall you are mounting the speaker to. The SONOS Era 300 Wall Mount comes with drywall anchors and four No. 6 self tapping screws. The screws can used to mount directly to a wall with studs behind it, but if no studs are available the drywall anchors should be used.
- Start by holding the wall mount up to the wall in the desired location and use a level to make sure its level. Mark all four holes with a pencil on the wall.
- If using the drywall anchors use a 3/16″ drill bit to make pilot holes in the drywall at the marked hole locations. Use a hammer to tap the drywall anchors into the wall.
Installing the Mount
- Once the wall has been prepped the wall mount should be held up to the mounting location (either up to the holes of the drywall anchors or the markings on the walls if installing into studs) and the No. 6 screws should be driven through the holes of the wall mount into the wall.
Attaching the Speaker
- Once the wall mount is secured to the wall the speaker should be placed on the mount and aligned to the holes in the bottom surface of the mount.
- Use the provided M5 screws to secure the speaker to the wall mount.
